Foundry Crossover Procedure

This page contains historical information. It may be outdated or unreliable.

Lets figure out what steps we want to take in order to integrate the Foundry switch.

Here is a starting point:

• Connect up all access switches and routers to the Foundry.
• Move srv1-30 and db's onto the first patch.
• Do away with the netgear.
• Move any other servers we want on the Foundry from csw1 to the second patch.
• Disconnect the fiber from csw1 and route a new fiber to the foundry.
• Once the first fiber uplink is established, do the same with the other one.
• Use remaining cisco's as access switches and backup routers.